Amarine Made 0.75L 125 PSI Pre-Pressurized Accumulator Tank: The Perfect Solution for Your Boat, Marine, RV, and Caravan

7 October 2023 By emspublishingusa.com

Amarine Made 0.75L 125 PSI Pre-Pressurized Accumulator Tank: The Perfect Solution for Your Boat, Marine, RV, and Caravan

Introduction

Are you tired of inconsistent water supply and noisy water pumps in your boat, marine vessel, RV, or caravan? Look no further! The Amarine Made 0.75L 125 PSI Pre-Pressurized Accumulator Tank is here to solve all your water supply problems. With its innovative design and top-notch features, this accumulator tank is a must-have for any water system.

Parameter

  • Inlet/Outlet Dia: 1/2″ MNPT
  • Volume: 0.75 Liter (25 FL OZ)
  • Water psi: Max 125 PSI (8.6 BAR)
  • Pre-charge pressure: 10 PSI (0.87 BAR)
  • Air Fill Vale: standard automotive style tire valve
  • Applications: Boat, Marine, RV, Caravan, etc.

Important Notes

  1. Relieve air psi prior to disassembly
  2. Do not use to pump flammable fluids, gasoline, kerosene fuel oil
  3. Do not use pump in an explosive environment or use where flammable vapors are present
  4. Petrol or fluids with a flash point below 37°C (98°F), explosion or death may occur
  5. The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set the accumulator tank to ~3 PSI below your water pump’s cut-in pressure and make sure it is connected to the outlet of the pump
  6. Do not over pressurize the tank. Pressures over 125 PSI (8.6 BAR) may rupture the tank and cause personal injury

Why Choose Amarine Made Accumulator Tank?

1. Longer Pump Life and Lower Battery Drain

By connecting the Amarine Made Accumulator Tank to the outlet side of your water pump, you can significantly extend the pump’s lifespan. The tank acts as a reservoir of air and water downstream from the pump, reducing the on/off cycle and providing a more consistent water supply. This not only improves the performance of your water system but also reduces battery drain, ensuring a longer-lasting and more efficient operation.

2. Noise Reduction

Say goodbye to the annoying noise produced by your water pump. The internal rubber membrane of the Amarine Made Accumulator Tank eliminates the need for constant maintenance and provides a quieter water system. Enjoy a peaceful and relaxing environment on your boat, marine vessel, RV, or caravan without the disturbance of a noisy water pump.

3. Better Control of Hot Water Delivery

The Amarine Made Accumulator Tank allows the pump to reach shut-off pressure more smoothly, resulting in better control of hot water delivery. No more sudden temperature changes or inconsistent water flow. Experience a comfortable and enjoyable showering experience with a steady supply of hot water.

Frequently Asked Questions

Q: Can I use the Amarine Made Accumulator Tank with any water pump?

A: Yes, the accumulator tank is compatible with most water pumps. However, it is recommended to set the accumulator tank to ~3 PSI below your water pump’s cut-in pressure for optimal performance.

Q: How do I install the accumulator tank?

A: The accumulator tank is simply fitted to new or existing water systems. Connect it to the outlet side of your water pump for the best results.

Q: Can I use the accumulator tank with flammable fluids?

A: No, the accumulator tank should not be used to pump flammable fluids, gasoline, kerosene fuel oil, or in an explosive environment.

Conclusion

The Amarine Made 0.75L 125 PSI Pre-Pressurized Accumulator Tank is the ultimate solution for a reliable and efficient water supply in your boat, marine vessel, RV, or caravan. With its innovative design, noise reduction capabilities, and better control of hot water delivery, this accumulator tank is a game-changer. Say goodbye to inconsistent water flow and noisy water pumps. Upgrade your water system today with the Amarine Made Accumulator Tank and enjoy a hassle-free and enjoyable water experience.